Pneumatic Sleeve Regulating Valve
Pneumatic Sleeve Regulating Valve Executive Standard:
Model: ZJHM
Nominal diameter: DN20 ~ 200mm
Nominal pressure: PN16 ~ 100MPa
Temperature:-196 ~ + 560 °C
Main material: WCB, LCB, WC9
Drive: aerodynamic
Design criteria: GB/ T17213
Flange Standard: GB / T9113, JB / T79, HG20594 and other standard
Inspection standards: GB / T4213
Connection: flange (FF RF RTJ), welding (SW BW), the screw (for a "Iess)
Pneumatic Sleeve Regulating Valve Introduction:
Pneumatic sleeve control valve is a pressure balance type control valve, the use of sleeve-oriented, pressure-balanced double seal surface valve body, equipped with multi-spring pneumatic actuator. S-stream flow was linear, the overall work balance, allowing pressure, flow characteristics of accurate, low noise characteristics. Especially suitable for large flow, large pressure difference before and after the valve, leaks do not engage in the occasion. This series of products are room temperature type, high temperature type, low temperature type, regulation cut off, bellows sealed and other forms. Nominal product pressure rating PN1.6,4.0, 6.4, 10.0; body diameter range DN20-300, the fluid temperature -196 ~ + 560 °C range of a variety of grades. Leakage levels are IV, V, VI. Flow characteristics of a straight line, equal percentage characteristics. A variety of different specifications to choose from.
Pneumatic Sleeve Regulating Valve Executive Standard:
Model: ZJHM
Nominal diameter: DN20 ~ 200mm
Nominal pressure: PN16 ~ 100MPa
Temperature:-196 ~ + 560 °C
Main material: WCB, LCB, WC9
Drive: aerodynamic
Design criteria: GB/ T17213
Flange Standard: GB / T9113, JB / T79, HG20594 and other standard
Inspection standards: GB / T4213
Connection: flange (FF RF RTJ), welding (SW BW), the screw (for a "Iess)
Main Technical Specifications:
The main shape and connection dimensions:
The above specifications are only for reference and subject to change without prior notice, please confirm with our sales representative when making order.